Test

THE LATHE

"The Lathe" Lathe is a machine widely using for wood works and machining of metal parts. The Lathe is using for facing, turning, knurling, taper cutting, threading, gear cutting and many other metal and wood works.

"The Lathe" tool cutter on the lather machine.

THE MILLING MACHINE : with a tone hole cylinder copier. Machining operation in which work is fed past a rotating tool with multiple cutting edges. The milling machine have a wide range of speed and this increases the quality and performance in mass production centers.

Trill Key on the tool that bends them to the correct shape

All the cutting elements for all twenty four tone holes, post holes, and any other shape or cavity on the clarinet body.

The Post Milling Setup on the Milling Machine.

BENCH MOTOR : This Bench Motor is using for straightening hinge rods, holding small parts for slotting, filing, buffing, sanding, wire brushing and drilling.

TONE HOLE TOOLS:

CLARINET'S JOINTS : (upper and lower clarinet joints) Three Chadash Bb upper and lower joints awaiting their time to undergo tone hole undercutting and bore polishing.

MOUTHPIECE CLARINET : Mouthpiece plays an important role in how your clarinet sounds.

ADJUSTABLE BARRELS : sitting on the tool post. Adjustable barrels is manufactured from a whole piece of naturally aged Dalbergia melanoxylon wood. Chadash technology allow the clarinetist to adjust pitch with a center ring mechanism.